|
 |
 |
 |
 |
|
Fluoroflex-T (PTFE) Nozzle Liners
The non-adhesive characteristic of PTFE retards build-up of solids. When
installed in the nozzle opening of reactors and other process equipment,
the PTFE liner can be easily cleaned without damaging fragile linings
of expensive equipment. PTFE liners are designed to reduce transmission
of vibration or shock to flange faces of such equipment and the smooth, tough
surface of PTFE minimizes the effects of erosion. Liner is designed to fit
inside Schedule 80 Pipe.
  |
 |
|
Convert To Metric Units
|
| Dimensional Data, inches |
| Part No. |
Nominal
Pipe Size |
Tube Extension
O.D. "A" |
Flare Dia.
"B" |
Wall Thickness
"C" |
| R19360-008L |
1/2 |
17/32 |
1 3/8 |
1/16 |
| R19360-012L |
3/4 |
45/64 |
1 11/16 |
1/16 |
| R19360-016L |
1 |
29/32 |
2 |
1/16 |
| R19360-024L |
1 1/2 |
1 15/32 |
2 7/8 |
1/16 |
| R19360-032L |
2 |
1 29/32 |
3 5/8 |
1/16 |
| R19360-048L |
3 |
2 27/32 |
5 |
5/64 |
| R19360-064L |
4 |
3 25/32 |
6 3/16 |
3/32 |
| R19360-096L |
6 |
5 45/64 |
8 1/2 |
7/64 |
| R19360-128L |
8 |
7 1/2 |
10 5/8 |
5/32 |
"L" is expressed in inches with fractions of an inch in eighths, e.g.,
36", 47 1/2", 62 5/8", etc.
Length tolerance: To 36" ± 1/4", over 36" ± 1/2". |
"This page is a machine translation of the source page, which is written in
English. This translation is intended to provide a general idea of the
page's content, and is not guaranteed for accuracy."
|
|
|
|
