Lugged Body Instrument Tees, 1.5" Branch PTFE/Polypropylene/PVDF-Lined

Housing Materials Fabricated Steel Flange Materials ASTM A105 Forged Steel Vacuum Ratings All 1 1/2" - 8" lugged body instrument tees are rated for full vacuum at maximum operating temperature. 10" - 12" sizes are not rated for vacuum service. Actual branch inside diameter may vary. If ID of branch is critical, consult the factory. Note: Lugged Body Instrument Tees cannot be installed side by side, they need to have a flanged spool installed between them.

Convert To Metric Units

150lb. Flanged Size (in.) Liner Part Numbers Dimensions (in.) P T J H Holes (No.) & Size G 1 1/2 PTFE T400M3ZZZLBBXXX 4 5 2 7/8 (4) 1/2-13 3 7/8 PP T400P3ZZZLBBXXX PVDF T400K3ZZZLBBXXX 2 PTFE T400M3ZZZL2BXXX 4 1/2 6 3 5/8 (4) 5/8-11 4 3/4 PP T400P3ZZZL2BXXX PVDF T400K3ZZZL2BXXX 3 PTFE T400M3ZZZL3BXXX 5 1/2 7 1/2 5 (4) 5/8-11 6 PP T400P3ZZZL3BXXX PVDF T400K3ZZZL3BXXX 4 PTFE T400M3ZZZL4BXXX 6 1/2 9 6 3/16 (8) 5/8-11 7 1/2 PP T400P3ZZZL4BXXX PVDF T400K3ZZZL4BXXX 6 PTFE T400M3ZZZL6BXXX 8 11 8 1/2 (8) 3/4-10 9 1/2 PP T400P3ZZZL6BXXX PVDF T400K3ZZZL6BXXX 8 PTFE T400M3ZZZL8BXXX 9 13 1/2 10 5/8 (8) 3/4-10 11 3/4 PP T400P3ZZZL8BXXX PVDP T400K3ZZZL8BXXX 10 PTFE T400M3ZZZLEBXXX 11 16 12 3/4 (12) 7/8-9 14 1/4 12 PTFE T400M3ZZZLFBXXX 12 19 15 (12) 7/8-9 17 PTFE lined lugged body instrument tees are supplied with a rotating flange on the branch. PP & PVDF lined lugged body instrument tees are supplied with a fixed flange on the branch. "This page is a machine translation of the source page, which is written in English. This translation is intended to provide a general idea of the page's content, and is not guaranteed for accuracy." Home | About Us | Contact Us | Careers | Terms and Conditions | Links Feedback | Privacy Statement | Terms of Use © Copyright 2000 Crane Co. All rights reserved.